Moffat GSC5062S Manuel d'utilisateur télécharger pdf (Page 12)

12

OR

Power Cut

• Push the corresponding knob in completely

and turn it left to the symbol “large flame”

symbol and ignite with a match.

• Release the knob and watch that the burner

has ignited. Upon ignition, adjust the flame as

required.

• If for any reason the flame should extinguish

turn off the relevant control knob, leave for at

least one minute and then re-ignite.

Extinguishing of burners

Turn the knob clockwise to mark «

».

Do not put anything on the hob that is

liable to melt.

Selecting the Correct burner

Above every knob there is a symbol for the

corresponding burner.

For good cooking results, always choose pans,

which correctly fit to the diameter of the burner

used (see figs). Choose thick, flat bottom pots.

We recommend the flame is lowered as soon as

the liquid starts boiling.

For a correct ignition always keep the burner ring

and the spark plugs clean.

The following diameter pans can be used:

Good use

Bad use

(

Power waste

)

Burner Power

Diameter (mm)

(kW) min. max.

Rapid 2,60 165 260

Semi-

Rapid

2,00 140 220

Auxiliary 1,00 120 160

Accessories delivered with the

appliance

The following accessories are supplied with your

appliance.

• Grill Deflector

To be used when the grill is operation.

• Shelf for placing dishes on (roast, pastry

mounds)

The dish should be put in the middle of the

shelf to balance the weight.

• A roasting tray with roasting grid on it.

It is used to collect juice when cooking in it,

place it on the shelf 2.

If you do not use the roasting tray, remove it

from the oven.

In addition to the accessories supplied we

recommend you only use heatproof dishes/pans

(according to the manufacturer’s instructions).

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 23 24

Commentaires sur ces manuels

Pas de commentaire